STANDARD FEATURES

► Fanuc Oi-MF Plus 10.4” Color LCD

► Fanuc 20HP Spindle Motor

► 512Kbyte / 800 Meter Memory

► Spindle CAT-40 with 8000 RPM

► PCMCIA Slot for Memory Expansion

► AC Digital Servo & Spindle Drivers

► Helical Interpolation & Custom Macro B                             

► Arm Type 24 Tool ATC

► Hardened Ground Box Ways on X,Y & Z                             

► Auto Lubrication System

► Meehanite Cast Iron Bed, Base & Headstock                     

► Fully Enclosed Splash Guard

► Heat Exchanger for Electrical Cabinet     

► Spindle Air Blast & Cutting Air Blast

► Automatic Power off (M30)                         

► Spindle Air Curtain

► Roll Out Coolant Tank & Chip Tray                          

► RS232 Interface

► Fanuc Operating & Maintenance Manual                        

► Operating & Electrical Manuals

► 4^th Axis Interface Cable only Ready                         

► Hand Held Coolant & Air Nozzle

► One Year Machine Parts Warranty                      

► Two Year Control Warranty

 

MACHINE SPECIFICATIONS

Travel X Axis —-  19.69” (500mm)

Travel Y Axis —– 15.75” (400mm)

Travel Z Axis —– 17.72” (450mm)

Rapid Feed Rate X & Y Axis -945ipm

Rapid Feed Rate Z Axis —  787ipm

Cutting Feed Rate -315ipm (8000mm/min)

Positioning X, Y & Z Axis -0.0001/12” (0.005mm / 300mm)

Repeatability X, Y & Z Axis -±0.0001” (±0.003mm)

Table Dimension –  27.56” x 15.75” (700mm x 400mm)

Maximum Loading –  660 lb (300Kg)

Spindle Motor – FANUC AC Spindle Motor ßiI 8 / 8000

Spindle Horse Power –  15/20 HP

Spindle Speed – 8000Rpm (Opt. 12000Rpm)

Spindle Taper – CAT-40

Servo Drive Motor X & Y Axis – Fanuc ß 12 / 3000is

Servo Drive Motor Z Axis ——  Fanuc ß 22 / 3000is

Distance from Spindle Nose to Table -4.72” – 22.44” (120 – 570mm)

 

ATC — Swing Arm Type Random, Shortest Path, Bi-Directional

Magazine Capacity —- 24 Tools

Tool Change Time —-  2.5 Second

Maximum Tool Weight – 15.4 lb (7.0kg)

Maximum Tool Length –8.86” (225mm)

Maximum Tool Diameter -3.14” (80mm)

Floor Space L x W x H 76.97”x90.16”x94.09” (1,955mmx2,290mmx2,390mm)

Power Requirement  220V, 3 Phase, 60Hz, 30kVA, 75Amp

Machine Weight -8,360 lb (3,800 kg)

 

OPTIONAL ACCESSORIES

Spindle Speed 12000RPM (included Spindle Oil Refrigeration Unit) $7,380

Data Server 256MB (DNC)–  $3,800

Chain Type Chip Conveyor & Cart –$5,800

Spindle Oil Refrigeration Unit –$2,700

Coolant Through Spindle Without Extra Tank & 300PSI Pump –$9,700

Coolant Through Spindle With Filter System, Extra Tank & 300PSI Pump –$13,800

Chip Flushing System — $1,150

Coolant Ring —$850

Oil Skimmer —$1,150

4^th Axis Interface with Servo Drive & Power/Signal Cable — $6,600

4^th Axis Complete with Manual Tailstock + Install (Tanshing VRNC-210) –$19,800

8″ 3 Jaw Chuck for Tanshing VRNC210 — $1,180

Flange for 3 Jaw Chuck Tanshing VRNC210 — $850

Transformer 30KVA -- $2,450

 

 

 

Fanuc Oi-MF Standard Features

*Max Controlled axis (5 axes)                         

*Controlled path (1path)

*Max Controlled axis in each path (5 axes)

*Axis control by PMC Max 4 axes

*Max Simultaneously controlled axes (Max 4 axes)

*Designation of Spindle axes (2 axes)

*Cs contouring control (each path/Total 1 axis)

*Axis synchronous control

*Tandem control, Torque control                       

*Control axis detach

*Increment system IS-A, IS-B                          

*Increment system C 0.0001mm, 0.0001deg, 0.00001inch

*Flexible feed gear (Optional DMR)                          

*HRV2 control, HRV3 control

*Inch/metric conversion                                                  

*Interlock & Machine lock all axes

*Emergency stop / Overtravel                    

*Stored stroke check / Stroke limit external setting

*Mirror image each axis                          

*Servo off / Mechanical handle

*Unexpected disturbance torque detection function

*Position switch

*Automatic operation, MDI operation                     

*DNC operation, DNC operation with memory card

*Schedule function, Program number search

*Sequence number search, Program restart

*Manual intervention and return                        

*Wrong operation prevention

*Retraction for Rigid tapping, Buffer register

*Dry run, Single block, Jog feed

*Manual reference position return                        

*Reference position setting without DOG

*Reference position setting with mechanical stopper

*Reference position return speed set

*Reference position shift                         

*Manual handle interruption

*Manual handle feed                               

*Incremental feed

*Jog and handle simultaneous mode                          

*Nano interpolation

*Positioning G00                                                         

*Single direction positioning G60

*Exact stop mode G61

*Tapping mode G63

*Cutting mode G64, Exact stop G09                           

*Skip G31, Reference position return G28

*Reference position return check G27

*Plane selection G17, G18, G19

*Linear interpolation, Circular interpolation

*Dwell in seconds and dwell in revolution

*Cylindrical interpolation                                               

*Helical interpolation

*Thread cutting, synchronous cutting                       

*High-speed skip, input signal is 4 point

*Torque limit skip                                                        

*2^nd/3^rd/4^th reference position return

*Normal direction control                       

*Index table indexing, General purpose retract

*Rapid traverse rate, Rapid traverse override

*Feed per minute, Feed per revolution

*Without position coder feed per revolution

*Without position coder constant surface speed control

*Tangenitial speed constant control                       

*Cutting federate clamp

*Automatic acceleration/deceleration     

*Rapid traverse bell-shaped acceleration/deceleration

*Linear acceleration/deceleration after cutting feed interpolation

*Feedrate override 0-254%                        

*One-digit F code feed, Inverse time feed

*Jog override 0-655.34%                     

*Override cancel, External deceleration

*Automatic corner deceleration                  

*Feedrate control with acceleration in circular interpolation

*Rapid traverse block overlap                       

*Al advanced preview control

*Tape code EIA/ISO                                                     

*Label skip, Parity check, Control in/out

*Optional block skip 9                             

*Max programmable dimension ±9 digit

*Program number O4 digit                         

*External memory and sub program calling function

*Sequence number N5 digit                         

*Absolute/incremental programming

*Decimal point programming/ pocket calculator type decimal point programming

*Input unit 10 time multiply                      

*Diameter/radius programming

*Rotary axis designation, Rotary axis roll-over

*Polar coordinate command

*Coordinate system setting                       

*Automatic coordinate system setting

*Workpiece coordinate system G52-G59

*Workpiece coordinate system preset

*Addition of workpiece coordinate system 48 pairs

*Direct input of workpiece origin offset value measured

*Manual absolute on and off                           

*Optional chamfering/corner R

*Programmable data input G10                           

*Programmable parameter input

*Sub program call 10 folds nested                        

*Custom macro

*Addition of custom macro common variables #100 – #199, #500 – #999

*Interruption type custom macro                         

*Canned cycle for drilling

*Circular interpolation by R programming 9 digit

*Automatic corner override

*Scaling                                                    

*Coordinate system rotation

*Programmable mirror image                         

*Tape format for Fanuc Series 10/11

*Small-hole peck drilling cycle                         

*Pattern data input

*Conversational programming with graphic function

*Auxiliary function (M8-digit)                    

*2^nd auxiliary function (B8-digit)

*Auxiliary function lock                          

*High speed M/S/T interface

*Multiple command of auxiliary function

*Spindle speed function S5 digit, binary output

*Spindle serial output S5 digit, serial output

*Spindle analog output S5 digit, analog output

*Constant surface speed control                       

*Spindle override (0 – 254%)

*Spindle orientation (1 spindle)                      

*2^nd spindle orientation

*Spindle output switching function (1 spindle)

*2^nd spindle output switching function

*Spindle synchronous control                       

*Rigid tapping

*Tool function (T8 digit)                        

*Tool offset pairs (400 pairs)

*Tool length offset                                                      

*Tool offset

*Tool radius/Tool nose radius compensation

*Tool length measurement

*Automatic tool length measurement                   

*Tool life management

*Extended tool life management                    

*Backlash compensation

*Backlash compensation for each rapid traverse and cutting feed

*Store pitch error compensation                  

*Part program storage 320Kbyte

*Number of registerable programs (400)

*Part program editing

*Program protect, Password funtion                       

*Extended part program editing

*Playback                                                   

*Background editing

*Status display, Clock function                      

*Current position display

*Program comment display (program name 31 characters)

*Parameter setting and display                       

*Parameter check sum function

*Alarm display, Alarm history display                       

*Operator message history display

*Operation history display                       

*Run hour and parts count display

*Actual cutting federate display                       

*Display of spindle speed and T code at all screens

*Directory display of floppy cassette                      

*Directory display and punch for each group

*Operating monitor screen                        

*Servo setting screen, Spindle setting screen

*Servo waveform display                       

*Maintenance information screen

*Software operator’s panel                         

*Software operator’s panel general purpose switch

*Extended software operator’s panel general purpose switch

*Multi-language display                       

*Dynamic display language switching

*Data protecting key (4 types)                        

*Erase CRT screen display (manual or automatic)

*Parameter setting support screen                        

*Help function

*Self-diagnosis function                      

*Periodic maintenance screen

*Display of hardware and software configuration

*Servo information screen

*Spindle information screen                        

*Graphic display

*Reader/puncher interface Ch 1, Ch2)                          

*External tool offset

*External machine zero point shift                         

*External massage

*External data input (including external tool offset, external message)

*External key input                                                       

*External program input

*External workpiece number search                        

*External program number search (1 – 9999)

*Memory card input/output                  

*Screen hard copy

*Power Mate CNC manager                       

*External I/O device control

*Embedded Ethernet